云顶集团·3118acm

    <br /> <b>Warning</b>: Use of undefined constant wp_title - assumed 'wp_title' (this will throw an Error in a future version of PHP) in <b>/www/wwwroot/sicongba.com/wp-content/themes/onii/header-pc.php</b> on line <b>35</b><br />



    云顶集团·3118acm

    EPDMCASE SHOW

    【EPDM】DN100三元乙丙橡胶接头“换热机组”

    服务内容：【EPDM】DN100三元乙丙橡胶接头“换热机组”

    简介：【EPDM】DN100三元乙丙橡胶接头“换热机组” DN100 three yuan ethylene propylene rubber joint "heat exchange unit" 上海淞江云顶集团·3118acm集团有限公司官方网站为您介绍：【EPDM】DN100三元乙丙橡胶接头“换热机组......

    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    DN100 three yuan ethylene propylene rubber joint "heat exchange unit"

    上海淞江云顶集团·3118acm集团有限公司官方网站为您介绍：【EPDM】DN100三元乙丙橡胶接头“换热机组”信息，淞江集团为众多客户换热机组厂家提供耐高温橡胶接头，主要采用三井4045三元乙丙橡胶生产，其中含量达到50%左右，我厂有三方含量检测报告，假一赔十。
    The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN100 EPDM Ternary Ethylene-propylene Rubber Joint "Heat Exchanger Unit" information, Songjiang Group provides high temperature resistant rubber joint for many customers heat exchanger manufacturers, mainly using Sanjing 4045 Ternary Ethylene-propylene Rubber production, which content reaches about 50%, our factory has three. Square content test report, false one compensate ten.

    一、DN100换热机组三元乙丙橡胶接头实物拍照：

    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    二 、换热机组三元乙丙橡胶接头介绍：
    名称：EPDM橡胶接头
    型号：KXT-EPDM
    口径：DN100
    压力：1.6Mpa
    长度：150mm
    轴向压缩：18mm
    轴向拉伸：10mm
    横向位移：12mm
    偏向角度：15°
    橡胶材质：三元乙丙橡胶（三井4045）
    法兰材质：碳钢 / 球墨QT450 / 不锈钢
    法兰标准：GB/T 9119-2000 （除此法兰标准之外，我厂还可以配套更多法兰标准，如需了解其他法兰标准请点击：橡胶接头法兰标准）
    适用介质：弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、高温120度以下；（注明：强酸碱、稀硫酸不能用，要选择四氟橡胶接头才可以使用。）
    使用优点：减震、降噪、保护液压设备的长期使用，降低维修成本。
    质保期限：12个月
    生产厂家：上海淞江云顶集团·3118acm集团有限公司
    了解该产品更多型号参数表请点击：【样册P33】KXT型可曲挠橡胶接头
    资质证书：合格证、质保书、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
    Name: EPDM rubber joint
    Model: KXT-EPDM
    Caliber: DN100
    Pressure: 1.6Mpa
    Length: 150mm
    Axial compression: 18mm
    Axial tension: 10mm
    Lateral displacement: 12mm
    Deviation angle: 15 degrees.
    Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
    Flange material: carbon steel / ductile QT450 / stainless steel.
    Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
    Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
    Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
    Warranty period: 12 months.
    Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
    Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

    三、换热机组三元乙丙橡胶接头发货现场：

    【EPDM】DN100三元乙丙橡胶接头“换热机组”

    四、换热机组三元乙丙橡胶接头工厂介绍：

    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    【EPDM】DN100三元乙丙橡胶接头“换热机组”
    【EPDM】DN100三元乙丙橡胶接头“换热机组”

    相关案例：供暖耐高温橡胶接头案例

    原创文章如转载，请注明本文链接: http://www.sicongba.com/1818.html    浏览：7,037